The independent E-type frame generates the energy needed for the lift movement when travelling autonomously. To generate the necessary pressure, a toothed wheel pump generates pressure in an on-board vessel. The frame is automatically lifted when a trolley is loaded. The frameis lowered when the foot pedal to release the trolley is depressed. The independent system does not require any pipe connections between the frames. Independent E-type frames are always fitted with an articulated tiller and can be operated with 2 or 4 E-type frames (max. load of the complete train 4  t). The pressure needed to lift the trolley is generated over a travel distance of under 20 m, depending on the condition of the floor. © Copyright 2013 multitechcompany.com. All rights reserved. Model 1000 15 Download Maximum  capacity* (kg) Maximum  lift height (mm) Travel speed (km/h) Battery voltage (V) Data Sheet- Download** E-type frame  independente